Panasonic DMR-BCT74 Operating Instructions Manual page 49

3D settings during playback
Change this setting when the screen is not
correctly displayed for 3D compatible
programmes.
1 Press [OPTION].
2 Select "Playback Settings" in "Playback
Menu", then press [OK].
3 Select "3D Settings", then press [OK].
4 Select the item, then press [OK].
Signal Format
- Original:
Keep original picture format.
- Side by side:
3D picture format comprising of left and right
screens.
- 2D to 3D:
Converts 2D pictures to 3D effect while playing.
3D Picture Mode
- Normal:
Normal 3D effects.
- Soft:
Soft 3D effects.
• This function cannot be enabled when "Signal
Format" is set to "2D to 3D".
- Manual:
3D effects set manually (
Manual Settings
(To change the setting, set "3D Picture Mode" to
"Manual".)
Distance
Set the amount of depth perception.
Screen Type
Selects how the screen appears during 3D
playback (flat or round).
Frame Width
Set the amount of feathering at the edge of
screen.
Frame Colour
Set the colour of feathering at the edge of
screen.
Graphic Display Level
Adjust the 3D position for the playback menu or
message screen etc. (
49)
81)
• Depending on the contents, displayed items are different.
• This unit only guarantees the playback of the Frame
Sequential and the Side-by-Side (Half) programme types.
• Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other
discomfort while viewing 3D images, discontinue use and
rest your eyes.
• Depending on the connected TV, the video being played
back might switch to 2D video due to changes in resolution
etc. Check the 3D setting on the TV.
• 3D video might not output the way it is set in "HDMI Video
Format" ( 90) and "24p Output" (
• It may display as Side-by-Side when playback of the 3D
video is started.
Playing back video
90).
49
SQT0351