Panasonic DMR-BCT74 Operating Instructions Manual page 13

Main unit
Display

 
Pull to flip down the
front panel.
1 Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
2 Open/close disc tray
3 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
4 CI module eject button (
5 CI (Common Interface) slot (
Disc

USB memory
6 Disc tray
7 USB port
8 SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
 
14)
14)
 
SD card
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
Display
2 3
1 Main display section indicator
- Current time
- Name of a broadcasting station
- Playback counter
- Various messages (
2 Drive (HDD, BD or SD) indicator
3 Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
4 Playback indicator
5 SD card slot indicator
6 USB port indicator
7 Disc indicator
8 Copying indicator
9 Remote control signal indicator
10 Timer recording indicator
This indicator lights up when the timer
recording standby or Keyword Recording
standby is activated.
[BCT84] only
§
Getting started
1
4 5 6 7 8 9 10
107), etc.
§
SQT0351
13