Re-Registering The Handset; Hs Registration - Panasonic KX-TG5230AL Operating Instructions Manual

TG5230AL.fm Page 64 Friday, June 11, 2004 5:31 PM
Cancelling Registration/Re-registration

Re-registering the Handset

If you want to re-register the handset to the base unit or a different base unit of the
same model, you need to register it to that base unit. The handset will be given a
new extension number of that base unit. Only one handset can be registered at a
time near the base unit.
Make sure the base unit and the other handsets are not being used. Have
both the handset and base unit nearby during registration.
If you have cancelled handset registration at a previous base unit (p. 63), start
from step 5.
1
Handset: Press [MENU].
2
Handset: Scroll to "Initial setting" by
pressing [d] or [B], then press the soft key
( ).
SELECT
3
Handset: Scroll to "Registration" by
pressing [d] or [B], then press the soft key
( ).
SELECT
4
Handset: Press the soft key (
registration".
5
Base unit:
Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds.
• The CHARGE indicator flashes. After the CHARGE indicator starts flashing,
the rest of the procedure must be completed within 1 minute.
6
Handset:
(1) Press the soft key (
(2) Wait until a long beep sounds and the
display shows the new extension number
(ex. extension number 2).
• Registration is complete.
• You can stop registration by pressing [OFF] on the handset and pressing
[LOCATOR/INTERCOM/TRANSFER] on the base unit.
64
Handset & Base Unit
) at "HS
SELECT
).
O K
Initial setting
Registration

HS registration

Press LOCATOR
on base unit
for 3 sec.
Then press OK
L
BACK PORTUG O K
SPIPRIVACY1
[2]
IN USE
Handset [2]
Registered