Yamaha RX-V3073 Owner's Manual page 112

❑ Front Presence
Selects whether or not front presence speakers are connected.
Settings
Use (default) Select this option when front presence speakers are connected.
None Select this option when no front presence speakers are connected.
❑ Rear Presence
Selects whether or not rear presence speakers are connected.
Settings
Use Select this option when rear presence speakers are connected.
None (default) Select this option when no rear presence speakers are connected.
• This setting is not available when "Surround" or "Front Presence" is set to "None".
❑ Subwoofer 1, Subwoofer 2
Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack and its phase.
Settings
Select this option when a subwoofer is connected to the
Normal SUBWOOFER 1 or SUBWOOFER 2 jack (phase not reversed). The
(default) subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
Use
Select this option when a subwoofer is connected to the
SUBWOOFER 1 or SUBWOOFER 2 jack (phase reversed). The
Reverse
subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
Select this option when no subwoofer is connected to the
SUBWOOFER 1 or SUBWOOFER 2 jack. The front speakers will
None produce LFE (low-frequency effect) channel audio and low-frequency
components from other channels when both "Subwoofer 1" and
"Subwoofer 2" are set to "None".
• When the bass sound is lacking or unclear, switch the subwoofer phase.
❑ SWFR Layout
Selects a subwoofer layout when 2 subwoofers are used.
Settings
Select this option when 2 subwoofers are placed on the left and right
Left + Right
sides of the room.
Select this option when 2 subwoofers are placed on the front and rear
Front + Rear
sides of the room.
Monaural x2
Select this option when 2 subwoofers are placed freely.
(default)
• This setting is not available when "Subwoofer 1" or "Subwoofer 2" is set to "None".
❑ Extra Bass
Sets the speakers to produce the front channel low-frequency components.
Settings
Depending on the size of the front speakers, either the subwoofer or
Off (default)
front speakers produce the front channel low-frequency components.
Both the front speakers and subwoofer produce the front channel
On
low-frequency components.
• This setting is not available when both "Subwoofer 1" and "Subwoofer 2" are set to "None", or when "Front"
is set to "Small".
■
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from "Meter" or "Feet".
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1,
Subwoofer 2
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
Default
3.00 m (10.0 ft)
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
112
En