Adjusting The Grip Belt; Attaching The Large Eyecup; Charging The Battery - JVC GY-HM620E Instructions Manual

Adjusting the Grip Belt

Open the pad and adjust the position of the grip belt
accordingly.
.
Caution :
If the grip is loose, the camera recorder may fall
0
off resulting in injuries or malfunction.
Attaching the Large
Eyecup
Attach the large eyecup (supplied) to prevent
0
external light from entering the viewfinder
screen and cameraman's vision.
Align and attach to the groove of the eyecup
0
mounted on the camera recorder.
The large eyecup can be attached in any
0
direction.
Large Eyecup (supplied)
Eyecup
.
Memo :
Do not remove the eyecup that is premounted
0
on the camera recorder.

Charging the Battery

Charging the Battery
Charge the battery immediately after purchase or
when the battery power is running low.
* The battery is not charged when purchased.
2
POWER
1
ON
OFF
(CHG)
MODE
.
1 Hold down the lock button (blue) at the
center of the [POWER ON/OFF(CHG)] switch
to set to "OFF(CHG)".
2 Attach the supplied battery.
Slide it in until you hear a click.
3 Connect the supplied AC adapter to the
[DC] terminal.
Open the cover of the [DC] terminal and connect
as shown in the diagram.
4 Connect the AC adapter to a power outlet.
The [POWER/CHG] lamp blinks during
0
charging and will go out after charging is
complete.
Remove the AC adapter after charging is
0
complete.
Memo :
Blinking of the [POWER/CHG] lamp during
0
charging indicates the charge level.
[POWER/CHG] Lamp
Orange blinking
(4 times per second)
Orange blinking
(3 times per second)
Orange blinking
(2 times per second)
Orange blinking
(1 time per second)
Light goes out
You can charge the battery even when operating
0
the camera recorder using the AC adapter.
4
POWER
/CHG
3
4
Charge Level
Less than 25 %
Less than 50 %
Less than 75 %
Less than 100 %
Fully charged
13