JVC GY-HM620E Instructions Manual page 18

Formatting (Initializing) SD Cards
When the following cards are inserted, [!FORMAT]
appears at the remaining media display area.
Format the card using the camera recorder menu.
Unformatted SD cards
0
SD cards formatted under different
0
specifications
Caution :
Be sure to format the SD card on this camera
0
recorder. SD cards formatted on a PC and other
peripheral equipment cannot be used on this
camera recorder.
[!RESTORE] appears at the remaining media
0
display area when an SD card that requires
restoring is inserted.
1 Select [System] B [Media] B [Format
Media].
2 Select the slot of the SD card to be
formatted and press the Set button (R).
.
3 The status of the selected SD card appears.
4 Select [Format] and press the Set button
(R).
.
18
5 Formatting starts.
.
6 Formatting is complete.
When formatting is complete, "Complete" appears
and the camera recorder returns to the [Format
Media] screen.
Memo :
During formatting, menu operation is
0
unavailable but you can start recording.
However, this is only available when a
recordable SD card is inserted in the other slot.
Formatting cannot be performed in the following
0
cases.
2
Caution :
If you format the SD card, all data recorded on
0
the card, including video data and setup files,
will be deleted.
4
Recording is in progress on the SD card to be
0
formatted.
SD card is not inserted.
0
Write-protect switch of the SD card is set (z
0
is displayed).