JVC GY-HM620E Instructions Manual page 16

Memo :
The menus and messages on the screen of the
0
LCD monitor or viewfinder are displayed in the
selected language.
2 Select a language using the cross-shaped
button (JK), and press the Set button (R).
The Initial Setting screen appears.
.
3 Ensure that the lens cover is closed, and
press the Set button (R).
Self-diagnosis starts.
0
A progress bar appears, and "Complete
0
Diagnosis" appears when the diagnosis is
complete.
.
Memo :
It takes about 6 minutes to complete the
0
diagnosis. During the diagnosis, do not operate
or turn off the camera recorder.
16
4 Press the Set button (R) after confirming
the exit screen.
The [Initial Setting] screen appears.
For U models
0
.
For E models
0
.
Memo :
The [Initial Setting] screen appears when the
0
power is turned on for the first time and when the
power is turned on after the built-in battery is fully
discharged.
The configured date/time data is saved in the
0
built-in rechargeable battery even if the power is
turned off.
5 Set the time zone and date/time.
A Move the cursor with the cross-shaped button
(HI) and select the setting item.
B Change the values with the cross-shaped
button (JK).
6 Press the Set button (R) after setting is
complete.
The clock is set to 0 seconds of the input date/
time.
Memo :
The configured date/time data can be displayed
0
on the LCD monitor and viewfinder and be
recorded to the SD card.
The value of the year can be set in the range of
0
"2000" to "2099".