JVC GY-HM620E Instructions Manual page 32

Memo :
You can specify whether to display the time
0
code, user's bit, or turn off the display in
[LCD/VF] B [Display Settings] B [TC/UB].
This item will not be displayed when "Off" is
selected.
Z Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, Z lights up.
a Live streaming mark a
When [Main Menu] B [System] B [Network]/
[Settings] B [Live Streaming Set] B [Live
Streaming] is set to "On", the distribution status
is displayed.
Icon
Distribution in progress (good
connection quality)
.
(Red)
Distribution in progress (poor
connection quality)
.
(Red)
Connection pending or
connection failed
.
(Yellow)
b Event/Warning Display Area
Displays error messages.
c Media Status
---- : No card found in the selected
slot
STBY : Recording standby
: Recording
RREC
REVIEW : Clip Review
STBY P : Pre Rec recording standby
: Pre Rec recording
RRECP
STBY C : Clip Continuous Rec recording
standby
32
Status
: Clip Continuous Rec recording
RRECC
STBYC : Clip Continuous Rec recording
pause
(displayed in
yellow)
STBY N : Interval Rec recording standby
STBYN : Interval recording pause
(displayed in
red)
: Interval Rec recording
RRECN
STBY M : Frame Rec recording standby
: Frame Rec recording
RRECM
STBYM : Frame Rec recording pause
(displayed in
yellow)
STOP : Unable to record to the card in
the slot
P.OFF : Power OFF
d Dual Rec/Backup Rec Display
"DUAL" is displayed in the Dual Rec mode and
"BACKUP" is displayed in the Backup Rec
mode.
Memo :
This item is not displayed when [Slot Mode] is
0
set to "Series".
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Media
Remain] is set to "Off". However, warnings will
be displayed.
Displayed in the Display 0 and Display 1 screens
0
during warnings only. (When the remaining time
is shorter than 3 minutes)
e Record Trigger
STBY B : When [Rec Trigger] is set to "On"
and recording is stopped
REC B : When [Rec Trigger] is set to "On"
and recording is in progress
f Expanded focus
"EXPANDED" (yellow) is displayed during
expanded focus.
g Operation lock
The r icon appears during operation lock.