Siemens WD14D366HK Instruction Manual And Installation Instructions page 19

End of the programme
Rinse Hold
Childproof lock
The washing and drying programmes are ended automatically.
appears on the display panel.
 Set the programme selector to Off.
 Remove the washing from the drum.
 Leave the door open so that the inside of the washer-dryer can dry out.
 Turn off the tap (not necessary on models with Aqua-Stop).
If the spin function was deactivated at the start of the wash cycle,
$ (no final spin = laundry remains in last rinsing water), the washing
programme is automatically stopped after the final rinse. The display
panel shows
In order to drain the rinsing water and, if required, spin the laundry:
 Press the 0 (Spin) button repeatedly until the required spin speed is
set. The water is drained and the washer-dryer spins the laundry. The
programme is completed when
The maximum spin speed depends on the selected wash programme.
If you do not wish to spin the laundry:
 Press the 0 (Spin) button until the Rinse Hold option is slected again
(indicator lamp lights up). The pump-out will be run without spin.
The programme is complete when
panel.
 Set the programme selector to Off.
 Remove the laundry.
 Leave the door open to allow the inside of the washer-dryer to dry out.
 Turn off the tap (not necessary on models with Aqua-Stop).
For preventing the washer-dryer functions that you have set from being
changed inadvertently.
w
Activate/deactivate:
 Press and hold the Set button
starts to flash for 3 seconds.
 Press the Option button
deactivate the Childproof lock.
 The symbol w lights/disappears when activated/deactivated.
alternating with
until the Childproof lock symbol w
è
within these 3 seconds to activate or
Ö
.
appears in the display field.
appears on the display
19