Table of Contents
Advertisement
Preparation
If you subscribe to an ADSL service
L Please attach a noise filter (contact your
ADSL service provider) to the telephone
line between the base unit and the
telephone line jack in the event of the
following:
– Noise is heard during conversations.
– Caller ID features (page 19) do not
function properly.
Telephone
line cord
Noise filter
(For ADSL users)
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
– in a convenient, high and central
location.
Battery
installation/replacement
Important:
L Use only the included rechargeable
batteries noted on page 4, 5.
L When replacing batteries, we recommend
using the Panasonic rechargeable
batteries noted on page 4, 5.
L Wipe the battery ends (S, T) with a dry
cloth.
8
L Install the batteries without touching the
battery ends (S, T) or the unit contacts.
1
Press the notch on the handset cover
firmly and slide it in the direction of the
arrow.
L When replacing batteries, remove the
old batteries positive (S) terminal first.
2
Insert the batteries negative (T)
terminal first. Close the handset cover.
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged, 5
remains on the display.
L The charge indicator lights up when the
handset is placed on the base unit.
Advertisement
Table of Contents
