For Telecom Call Minder Or Telstraclear Message Mailbox Service Subscribers - Panasonic KX-TG1831NZ Operating Instructions Manual

Caller ID Service
Editing a caller's phone number
before calling back
The caller's telephone number, which is sent
to your telephone from your local telephone
exchange, includes "0" and an area code
prefix. For local calls, "0" and the area code
prefix can be omitted.
1
{j/OK} i "Caller List" i {>}
2
Press {^} or {V} to display the desired
entry.
3
{j/OK} i "Edit and Call" i
{>}
4
Edit the number.
L Press dial key ({0} to {9}) to add,
{C/T} to delete.
5
{C} / {s}
Erasing caller information
1
{j/OK} i "Caller List" i {>}
2
Press {^} or {V} to display the desired
entry. i {j/OK}
3
"Erase" i {>}
L To erase all entries, select "Erase
All". i {>}
4
"Yes" i {>} i {ih}
Storing caller information into the
handset phonebook
1
{j/OK} i "Caller List" i {>}
2
Press {^} or {V} to display the desired
entry. i {j/OK}
3
"Add Phonebook" i {>}
4
Continue from step 3, "Adding entries to
the handset phonebook", page 13.
20
For Telecom Call Minder
or TelstraClear Message
Mailbox service
subscribers
To receive Call Minder or Message Mailbox
messages, please note the following:
"Call Minder" and "Message Mailbox" are
automatic answering services offered by
your service provider/telephone company. If
you subscribe to this service, your service
provider/telephone company's voice mail
system will answer calls for you when you
are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/telephone
company, not your telephone. Your service
provider/telephone company uses a
"Stutter" dial tone (special dial tone) to
indicate that you have new messages.
When you have new messages, 0 will be
displayed on the handset. Please consult
your service provider/telephone company
for details of this service.
Note:
L If 0 still remains on the display even
after you have listened to new messages,
turn it off by pressing and holding {C/T}
for 2 seconds.