Comfortsense ® 7500 Thermostat; Features - Lennox ComfortSense 7500 Installation And Setup Manual

®
ComfortSense 7500 Commercial
Thermostat (C0STAT06FF1L)
(Catalog No. 13H15)
Description
®
The ComfortSense
(C0STAT06FF1L) is an electronic 7-day universal
multi‐stage programmable
thermostat. It also offers enhanced capabilities
which include:
S
dehumidification measurement and control,
S
equipment maintenance reminders,
S
worry-free memory storage feature,
S
menu-driven touch-screen display.
This thermostat supports heat pumps (single or
two stage) or non-heat pump units, with up to:
S
two auxiliary stages
S
two stages of heating and two stages of
cooling.
Unit Dimensions (H x W x D)
Case dimensions: 3-5/16 x 4-5/16 x 7/8 in. (84 x
110 x 22mm)
7500 commercial thermostat
touch
Wall Plate Dimensions (H x W)
Plate dimensions: 4-1/2" x 5-3/4" (114 x 146mm)

Features

Compressor Short Cycle Protection
This thermostat is equipped with automatic
compressor protection to prevent potential
screen
damage due to short cycling or extended power
outages. The short-cycle protection provides a
5-minute delay between heating or cooling cycles
to prevent the compressor from being damaged.
A 5-minute compressor short cycle protection
timer begins when a compressor output is
de-energized. Also, if a power loss occurs, the
system will go into compressor protection mode
and display "waiting" next to either a snow flake
(compressor cooling), or flame (compressor
heating) in the display.
Internal and External Temperature Sensors
See information starting on page 11 for sensor
wiring and configuring sensor settings under
Installer Settings menu.
3