Cleaning - Panasonic SR-SSS185 Operating Instructions Manual

Cleaning

O For cleaning, remove the Power Plug and ensure that the main body has cooled down.
O The Packing attached to both the main body and the Inner Lid cannot be removed.
Do not pull on it forcedly. (Since this could result in the Packing coming off or tearing.)
O After washing, wipe with a dry cloth.
When using for the first time & on every use
O After removing, wash with a soft sponge.
Inner Pan Rice Ladle Inner Lid Steam
Scoop Cap
O After using seasoning, such as mixed rice or casserole, wash promptly.
(Since these can cause odors, rot, or rust)
<Do not use any of the following>
Metal scourers, nylon scourers
impregnated with an abrasive etc.
Benzine, thinner, polish, bleach,
antibacterial alcohol etc.
Dishwasher/dryer or dish dryer
Steam Cap
Remove and rinse with water.
Precautions
O Do not remove the Packing.
(It may cause steam to leak, or cooking contents to jet out.)
O If the Packing came off, please surely fix it.
Packing
Fit into the groove Press into the hole
Q Removing
①OPull up to remove.
②OO O pen while pressing the button.
Shaking makes a
noise because of
the ball inside.
Button
Shaft
Q Attaching (In the reverse order to removing.)
①OO I nsert the shaft and close firmly until it clicks.
②OO A ttach on the Outer Lid.
(Ensure that it has been attached firmly.)
24
Water
Steaming Rice Scoop
Vessel
Plate Holder
Inner Pan / Rice Scoop /
(P.8)
Ladle / Steaming Plate /
Rice Scoop Holder
Do not wash using
Wash with a mild washing-up
the scouring pad.
liquid.
Precaution
O Do not use the Inner Pan as a
washing-up bowl.
(
Since this may result in
peeling of the inner coating.
Stoppers / Inner Surfaces of Outer Lid /
Packing / Hooks
Wipe with a well-wrung cloth.
[Stoppers / Hooks]
O If they are blocked with objects such as grains of rice,
remove them with bamboo skewers or similar utensils.
(Failure to do so may cause steam to jet out,
ingredients to eject out, or prevent the Outer Lid
from opening properly.)
[Inner Surfaces of Outer Lid / Packing]
O Remove the Steam Cap and wipe the inner surface
of the Outer Lid, the attaching portion of the Steam
Cap and the Packing.
Stoppers
Packing
Packing
Hooks
Inner Lid
Lid Sensor
Packing
)
Water Vessel
Pan Sensor
Clear Frame
Wipe with a well-wrung cloth.
O Do not wash by pouring in water etc.
Water Vessel
Wash with water and wipe clean any water drops.
O If there is scale (such as minerals within the water)
on the Water Vessel, use a nylon scourer and wipe
gently.
Lid Sensor / Pan Sensor / Water Vessel Sensor
Wipe with a well-wrung cloth.
O If the dirt is hard to remove, dab
a mild washing-up liquid on a
nylon scourer and wipe gently.
Notes
O Using the Lid Sensor or Pan
Sensor while they are dirty may
result in the rice being burnt or
cooked in an unsatisfactory way.
O Using the Water Vessel Sensor
while it is dirty may result in the
steam quantity changing and the
rice being cooked in an
unsatisfactory way.
Inner Lid / Filter
Remove and wash with a mild washing-up liquid.
(Also remove and wash the Filter.)
O Remove and wash both side
of the Inner Lid.
In particular, wash the inside
of the packing carefully, as dirt
can collect easily there.
O If the parts of the following
illustrations are blocked with
objects such as grains of rice or dirt, remove them
with bamboo skewers, toothpicks or similar
utensils.
(
It may cause steam to leak, or cooking contents
to jet out.
Pressure Holes in the rear
Control Holes side of the Inner Lid
O Quickly push the Safety Valve
2 to 3 times with your finger and
wash with running water.
Water Vessel
Inlet Hole
Precaution
O After cooking with seasoning (for mixed rice etc.),
please wash promptly.
(Since these can cause odors, rot, or rust.)
Q Removing
①OO P ress the button.
②OO P ull out.
③OO S lide the Filter up and
③
Q Attaching
①OO S lide the Filter from top to
bottom to attach it.
②OO I nsert the Inner Lid into the
grooves.
③OO P ress into the Outer Lid
until you hear a "click".
Water Vessel Sensor
* The Filter may loosen or hardly fix in accordance
with use. In that case please replace it.
Water Vessel Inlet Hole
Wipe with a well-wrung cloth.
O Wipe water from the inside, and remove objects
such as grains of rice.
(
It may cause the Water Vessel being burnt or
Dirt on Pan Sensor
steam not jetting out.
Packing
)
Net of Filter
Safety
Valve
(The Inner Lid tilts forward.)
remove.
③
①
②
Grooves
)
25