Troubleshooting Guide - Panasonic SJ-MR100 Operating Instructions Manual

Portable md recorder
Hide thumbs Also See for SJ-MR100:
Table of Contents

Advertisement

ENGLISH

Troubleshooting guide

Before requesting service for this unit, check the chart below for a possible cause of the problem
you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the
problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not
solve the problem, refer to the directory of Authorized Service Centers (enclosed with this unit) to
locate a convenient service center, or consult your dealer for instructions.
Reference pages are shown as black circled numbers <.
Problems
Player does not operate
at all.
Cannot start play.
The player does not play
in order from the first
track.
Cannot start recording
or enter text.
Noise
No sound from the
earphones.
No response from the
remote control.
Disc and track titles are
incorrectly displayed or
not displayed at all.
The unit cannot be
opened.
74
≥Is the hold function on? <
≥Is a disc loaded? B P
≥Is the unit completely connected to the AC power source? 8
≥Have the batteries run down? :
≥Is there a problem with the disc?
Have you inserted a blank disc?
≥Has the play mode been switched to "RANDOM" ("RND")? X
≥Did you stop the disc part way through the last time you
listened to it?
≥Have you inserted a playback disc?
≥Is the disc write protected? v
≥Is the unit correctly connected to the other equipment? B
≥Is the digital optical signal being correctly output from the
other equipment?
Are you using the player near a strong magnet, such as may
be found in a television?
≥Has the volume been turned down too far? P
≥Have the plugs on the earphone and remote control been
inserted correctly? (Try plugging it in again.)
≥Are the plugs dirty? (Wipe away dirt on plug.)
Have you entered more text than the MD can hold?
(1792 characters can be entered.)
Have the batteries run down, or is the unit incompletely
connected to the AC power source?
Check this

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents