Printer Menu Mode - Panasonic KX-PS8000 Setup Manual

Printer Menu Mode

The printer Menu mode includes a Main menu, Item
menu, Selection 1 menu and Selection 2 menu
which can be changed from the printer panel.
When Ready is displayed in the upper line of the
LCD, pressing the MENU/EXIT button will allow you
to enter the Menu mode.
Once in the Menu mode:
BPress the F/CONTINUE button to:
 Display the next menu.
 Display the next item.
 Increase the numerical value of the selection by
1 or display the next selection.
BPress the I/CANCEL button to:
 Display the previous menu.
 Display the previous item.
 Decrease the numerical value of the selection
by 1 or display the next selection.
Main Menu
Test Page
Color Calibration
System Setting
Network * 2
* Factory default setting
1
* This menu appears when the optional network card is installed.
2
BPress the ENTER button to:
 Enter a sub - menu.
 Activate a selection.
 Print a Configuration/Maintenance/
Before you attempt to change any settings, check
the factory default settings in the following table. For
details on changing the settings, refer to Outline for
Operation (
Once you have changed the printer panel settings,
they are automatically saved as user default settings
even if the power is turned off.
Item Menu Selection 1 Menu
Configuration Page
Maintenance Page
CYAN
MAGENTA
YELLOW
BLACK
Calibration Offset 0*
CYAN 0*
MAGENTA 0*
YELLOW 0*
BLACK 0*
Calibration Test Print
Reset Calibration
YES
NO
Energy Star
ON*
OFF
Auto Continue
ON
OFF*
Data Timeout
ON
OFF*
IP Address xxx.xxx.xxx.xxx
Subnet Mask xxx.xxx.xxx.xxx
Default Gateway xxx.xxx.xxx.xxx
Color Calibration Page.
P. 53).
Selection 2 Menu
1 (-5 to 5)
1 (-10 to 10)
(-10 to 10)
1
(-10 to 10)
1
(-10 to 10)
1
1
1
30* 1 (30 to 240 s)
1
(continued)
51