Outline For Menus - Panasonic KX-PS8000 Setup Manual

Main Menu
Maintenance

Outline for Menus

Test Page
Prints the Configuration Page and Maintenance
Page.
Configuration Page
Prints general information on printer settings and
configuration.
Maintenance Page
Prints each color (Cyan, Magenta, Yellow or Black)
halftone to check for print quality.
Color Calibration
Adjusts the toner density for each color
independently or all colors.
Calibration Offset
Adjusts the density for all colors (CYAN,
MAGENTA, YELLOW and BLACK). Setting a
higher number provides darker colors and setting a
lower number provides lighter colors.
CYAN / MAGENTA / YELLOW / BLACK
Adjusts the density for each color independently.
Setting a higher number provides darker color and
setting a lower number provides lighter color.
Calibration Test Print
Prints a Color Calibration Page with the current
density settings.
Reset Calibration
Setting YES resets the current settings back to the
default settings.
Note:
B The color density setting affects the average
life of toner.
System Setting
Configures the printer.
Energy Star
52
Item Menu Selection 1 Menu
Page Count xxxxxx
Imaging Unit Usage=xx%
Transfer Unit Usage=xx%
Fuser Unit Usage=xx%
Oil Roll Usage=xx%
To conserve energy and operating cost, this printer
is provided with a programmable power save
feature. Printer is factory set with the power save
feature turned on.
If Energy Star is enabled, the printer enters the
Energy Star mode when the printer is idle for 30
minutes.
Auto Continue
With the Auto Continue set to ON, the printer
automatically recovers from the following error
conditions if no recovery operation is done for 10
seconds.
Data Timeout
With the Data Timeout set to ON, the printer
automatically returns to Ready status if the printer
does not receive any data from a computer within
the time period set in this selection (30 to 240
seconds).
Network
Sets the addresses used in TCP / IP Protocol.
During setting, use the I /CANCEL button to move
the cursor and the F / CONTINUE button to
increase the numerical value.
Maintenance
Displays the page count of the printer and the
consumption of supplies. It also gives you an idea
when the following supplies need to be replaced.
The following table shows the average life of each
supply, which is based on a 5% image area and
standard density.
* When a supply is replaced with a new one, the
printer will automatically reset the page counter for
that supply to 0.
Selection 2 Menu
BMemory Overflow
BSCSI communication error
Supplies
Monochrome 60,000 pages
Imaging Unit *
or Color 15,000 pages
Transfer Unit 80,000 pages
Fuser Unit * 31,000 pages
Oil Supply Roll * 15,500 pages
Average life