Duplicating Documents; Using The Digital Duplicator Utility - Panasonic KX-PS8000 Setup Manual

Duplicating Documents

Any acceptable documents (
duplicated. Before you start operation, make sure
the printer is ready. (The "READY" indicator is
illuminated.)
There are two methods to duplicate a document:
A. Using the Digital Duplicator Utility (
B. Using the Scanner Panel (
Using the Digital Duplicator
Utility
For Windows 3.1 users:
1
From the Program Manager, double
click the KX-PS8000 Utilities icon and
double click the Digital Duplicator
Utility icon.
The Digital Duplicator Utility window is
displayed.
Go to step 2.
For Windows 95/Windows NT 4.0
users:
Click Start , move the pointer to
1
Programs, then to
KX-PS8000 Utilities. Next, click
Digital Duplicator Utility.
The Digital Duplicator Utility window is
displayed.
44
P. 42) can be
below)
P. 45)
2
Place the document(s) in the ADF tray
or on the scanner glass
Note:
B Scanning a document using the flatbed
(scanner glass) produces better quality than
using the ADF. For best quality use flatbed
scanning.
3
If you wish to make more than one
duplicate, set the number of duplicates
using numbers 0-9.
BYou can set the number of duplicates
between 1 and 999.
BClicking
will reset the number of
duplicates to 1.
4
If you wish to use the multi-purpose
tray, perform the following and go to
step 5.
# Insert the paper in the
multi-purpose tray.
BFor instructions on how to insert the
media in the multi-purpose tray,
refer to the Operating Instructions on
the KX-PS8000 CD-ROM.
$ Click
multi-purpose tray.
BThe green indicator shows which tray
has been selected.
% Select a Media Type and a Paper
Size.
.
( P. 43)
to select the