Connections - Panasonic SC-HC395 Operating Instructions Manual

Connections

Connect the antenna.
1
[SC-HC397]
This unit can receive DAB/DAB+ and FM stations with the DAB
antenna.
Be sure to tighten the nut
fully.
[SC-HC395]
Connect the AC mains lead after all other connections are completed.
2
This unit consumes a small amount of AC power (l 21) even when turned off.
≥ In the interest of energy conservation, if you will not be using this unit for an extended period
of time, unplug it from the mains socket.

≥ These speakers do not have magnetic shielding. Do not place them near a TV, personal computer or other magnetic devices.
≥ Tape the antenna to a wall or column in a position with the least amount of interference.
≥ [SC-HC397] If radio reception is poor, use a DAB outdoor antenna (not supplied).
≥ [SC-HC395] If radio reception is poor, use a FM outdoor antenna with a right angle type connector (not supplied).
Connect an external music device
1
Connect an external music device using an audio
cable (not supplied).
≥ Plug type: ‰3.5 mm stereo
2
Press [RADIO/AUX] repeatedly to select "AUX"
and start playback on the connected device.
∫ To select the sound input level of the
external device
1
While in AUX mode, press [SOUND] repeatedly to
select "INPUT LEVEL".
2
Press [3, 4] to select "NORMAL" or "HIGH" and
then press [OK].
≥ The factory default is "NORMAL".

≥ To improve sound distortion when "HIGH" is selected, select "NORMAL".
≥ Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will
distort the sound.
≥ For details, refer to the operating instructions of the device.
Adhesive tape (not supplied)
Adhesive tape
(not supplied)
FM indoor antenna
(supplied)
To a mains socket
DAB indoor antenna
(supplied)
AC mains lead (supplied)
Audio cable
(not supplied)
5
RQT0A88