Sending Documents; Automatic Redialling - Panasonic UF-E1 User Manual

Sending Documents

I To redial the last number
1. Set document(s) FACE DOWN on the ADF and adjust the Document Guides.
REDIAL/
2. Press [REDIAL/PAUSE] button.
PAUSE
3. The apparatus starts to dial the last dialled telephone number.
I Automatic Redialling
If the line is busy, your apparatus will redial the number up to 2 times at 3 minute interval. During that time, a
message will appear as shown on the right. If the line is still busy after the last try, a message [REDIAL
OVER] will appear as shown on the right and your apparatus will print a COMM. Journal depending on the
FAX SETTING. (See page 83)
(See note1) (See note2)
1. To stop the transmission, press [STOP].
NOTE
2. If you need a special access number to get to an outside line, dial it first then press [PAUSE]
to enter a pause (represented by a "-") before dialling the full number.
Ex: 9 [PAUSE] 555 1234
3. If you are using pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press [TONE] (represented by a "T"). The dialling mode will be changed from Pulse to Tone
after dialling the letter "T".
4. When you hear the voice of the other party through the speakerphone after step 3, lift up the
handset and tell the other party to prepare to receive a document. After you hear a beep, press
[START] and replace the handset.
5. While a document is kept in the memory waiting for the transmission, you cannot send another
document until the memory transmission is completed.
6. Number of redialling depends on countries.
(See note3) (See note4) (See note5) (See note6)
1
Set document(s) FACE DOWN on the ADF
and adjust the Document Guides.
2
Enter the telephone number.
Ex:
Following dialling methods can also be
used.
Direct Dialling (See page 31)
G
Abbreviated Dialling (See page 31)
G
Directory Search Dialling (See page
G
30)
3
START
5551234
REDIAL OVER 630
WAITING TO DIAL
35