Table of Contents
Advertisement
Camera interfaces
Camera interfaces
Status LEDs
This chapter describes the Gigabit Ethernet port, inputs and outputs, and trig-
ger features.
Note
Read all Notes and Cautions in the AVT GigE Installation
Manual before using any interfaces.
www
For accessories like cables see:
http://www.alliedvisiontec.com/emea/products/
accessories/gige-accessories.html
LED2 (green)
Status LEDs
LED1 (orange)
Figure 26: Example: Rear view of Mako camera
The tables below describe the status LEDs of Mako cameras.
LED1 color
Solid orange
Flashing orange
Table 16: Status LED (orange)
LED2 color
Solid green
Slow flashing green
Four rapid flashes per second Transmission error.
Table 17: Status LED (green)
8-pin camera
I/O connector
(+ ext. power)
Status
Ethernet link established
Network traffic
Status
Camera powered
Booting routine
Contact
support@alliedvisiontec.com
Mako Technical Manual V2.1.0
38
Advertisement
Table of Contents
