Table of Contents
Advertisement
Specifications
Specifications
Mako G-032B/C
Feature
Resolution
Sensor
Type
Sensor size
Cell size
Lens mount
Max frame rate at full resolution 102 fps
Max image bit depth
On-board FIFO
Mono formats
Caution
Before operating any AVT camera, read the safety instructions
and ESD warnings in the AVT GigE Installation Guide.
http://www.alliedvisiontec.com/emea/support/downloads/
product-literature/hardware-installation-guide.html
Caution
Due to the small packaging and high speed of Mako cameras,
take care to ensure that the housing temperature of the cam-
era does not exceed 45 °C. The following are general guide-
lines for heat dissipation:
• Mount the camera on a heat sink such as a metal bracket.
• Lenses, when attached to a camera, act as a heat-sink and
help reduce housing temperature.
• Ensure sufficient air flow. Use a fan if necessary.
Note
All measurements were done without protection glass /
without filter.
The uncertainty in measurement of the quantum efficiency
values is 10%.
This is due to:
• Manufacturing tolerance of the sensor.
• Uncertainties in the measuring apparatus itself
(Ulbricht sphere, optometer, etc.).
Specification
658 x 492
SONY IT CCD ICX424AL/AQ with HAD microlens
CCD Progressive
Type 1/3
7.4 μm
C / CS-Mount
12 bit
64 MByte, up to 202 frames at full resolution, Mono8/Bayer8, and a
GevSCPSPacketSize = 8192 bytes per packet
Mono8, Mono12Packed, Mono12
Table 3: Mako G-032B/C camera specifications
Mako Technical Manual V2.1.0
17
Advertisement
Table of Contents
