Table of Contents
Advertisement
Camera cleaning instructions
Figure 3: Removing IR cut filter/protection glass using special tool (E9020001)
Cleaning Instructions
Please carefully remove the filter/protection glass and clean it on both
sides using the techniques explained below.
Note
• Taking out the filter requires special care.
• Ask your dealer to help you if you are not
confident with the procedure.
3. If the impurity is neither on the lens nor the IR cut filter/protection glass,
it is probably on the sensor.
Perform all cleaning operations (lenses, filter/protection glass, and sensor) in
a dust-free clean-room. The optical components are very fragile so it is import-
ant to avoid touching them with your fingers or any hard material.
1. Unplug the camera from any power supply before cleaning.
2. Apply a small amount of optics cleaner (60% ethyl alcohol, 40% ether) to
a clean, new lens cleaning tissue.
Acceptable material includes medical-grade sterile optical cotton, or lens
tissue that is chemically pure and free from silicones and other additives.
– Do not use cosmetic cotton.
– Do not use consumer eyeglass cleaning cloths pre-treated with silicon.
Mako Technical Manual V2.1.0
12
Advertisement
Table of Contents
