Table of Contents
Advertisement
Specifications
Mako G-125B/C
Feature
Resolution
Sensor
Type
Sensor size
Cell size
Lens mount
Max frame rate at full resolution 30 fps
Max image bit depth
On-board FIFO
Mono formats
Color formats
Exposure control
Gain control
Horizontal binning
Vertical binning
Opto-coupled I/Os
Voltage requirements
Power consumption
Trigger latency*
Trigger jitter*
Operating temperature
Storage temperature
Body dimensions (L x W x H)
Mass
Hardware interface standard
Software interface standard
Camera control interface
Regulatory
*It is possible to start the exposure of the next frame while the previous frame is read out:
– Idle state: sensor is ready and camera is idle, waiting for the next trigger
– Frame valid state: sensor is reading out and camera is busy. If the Next frame is requested by an
external trigger in this state, higher latency may occur as compared to the Idle state
Specification
1292 x 964
SONY IT CCD ICX445ALA/AQA with EXview HAD microlens
CCD Progressive
Type 1/3
3.75 μm
C / CS-Mount
12 bit
64 MByte, up to 52 frames at full resolution, Mono8/Bayer8, and a
GevSCPSPacketSize = 8192 bytes per packet
Mono8, Mono12Packed, Mono12
BayerRG8, BayerRG12, BayerRG12Packed, Mono8, RGB8Packed,
YUV411Packed, YUV422Packed, YUV444Packed, BGR8Packed
12 μs to 84 s
0–30 dB
1 to 8 pixels
1 to 14 rows
1 input, 3 outputs
12–24 VDC or PoE
2.3 W @ 12 VDC, 2.7 W PoE
Idle state: 8.0 μs
Frame valid state: 25.0 μs
Idle state: 4.0 μs
Frame valid state: 21.0 μs
+5°C to +45°C (housing temperature)
-10°C to +70°C ambient temperature (without condensation)
60.5 x 29 x 29 mm; including connectors, without tripod and lens
80 g (without lens)
PoE, IEEE 802.3af 1000BASE-T, 100BASE-TX
GigE Vision Standard 1.2
GenICam V1.0 compliant
CE, FCC Class B, RoHS (2011/65/EU), WEEE
Table 6: Mako G-125B/C camera specifications
Mako Technical Manual V2.1.0
24
Advertisement
Table of Contents
