Power Supply Status - Cisco Nexus 2000 Series Installation Manual

Appendix E LEDs
Table E-1
Component
Port LED
For a description of the two power supply status, see the

Power Supply Status

This section describes the power supply LED indicators for the Cisco Nexus Fabric Extenders.
describes the status indicated by the Cisco Nexus 2348TQ, Cisco Nexus 2348UPQ, Cisco Nexus
2248TP-ETP, 2232PP, and 2224TP power supply LEDs.
Cisco Nexus 2148T power supply LEDs.
Table E-2
Condition
No AC power to the power supplies
Power supply failure (includes
overvoltage, overcurrent,
overtemperature, and fan failure)
Power supply warning events where the
power supply continues to operate
(high temperature, high power, and
slow fan)
AC present /voltage standby (VSB) on,
and power supply unit off
Power supply On and OK
Table E-3
Condition
No AC power to the power supplies
Power supply failure (includes
overvoltage, overcurrent,
overtemperature, and fan failure)
LEDs for the Cisco Nexus Fabric Extenders
LED
Indicates LED
status
Power Supply LED Indicators for the Cisco Nexus 2348TQ
Cisco Nexus 2248TP-ETP , 2232PP , and 2224TP
OK LED Status (Green)
Off
Off
Off
blinking
On
Power Supply LED Indicators for the Cisco Nexus 2148T
INPUT OK LED Status (Green) OUTPUT OK LED Status (Red)
Off
Off
Chassis and Module LEDs for the Cisco Nexus Fabric Extenders
Status Description
The port is not active or the link is not connected.
Off
The port is active. The link is connected and
Solid on
operational.
(green)
The module or port is disabled through the CLI
Solid on
command or the module is initializing.
(amber)
The port is faulty and has been disabled.
Blinking
(amber)
"Power Supply Status" section on page
Table E-3 describes the status indicated by the
Cisco Nexus 2000 Series Hardware Installation Guide
E-3.
Table E-2
,
Cisco Nexus 2348UPQ
FAIL LED Status (Amber)
Off
On
1 blinking
Off
Off
Off
On
E-3
,