Grounding the System
Figure 4-2
1
ESD ground strap
2
Clip and grounding lug
3
Side view of grounding lug (clip slid behind
screw)
In addition, follow these guidelines when handling these devices:
Handle carriers by available handles or edges only; avoid touching the printed circuit boards or
•
connectors.
Place a removed component board-side-up on an antistatic surface or in a static-shielding container.
•
If you plan to return the component to the factory, immediately place it in a static-shielding
container.
•
Never attempt to remove the printed circuit board from the metal carrier.
For safety, periodically check the resistance value of the antistatic strap. The measurement should be
Caution
between 1 and 10 megohm (Mohm).
Cisco Nexus 2000 Series Hardware Installation Guide
4-12
Cisco Nexus 2300 Series FEX Ground Lug Location
Chapter 4
Installing a Cisco Nexus Fabric Extender
4
Clip installed (behind screw)
5
Ground Lug