4.3
MINIMUM MANTEL CLEARANCES
RISK OF FIRE, MAINTAIN ALL SPECIFIED AIR SPACE CLEARANCES TO COMBUSTIBLES. FAILURE
TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE A FIRE OR CAUSE THE APPLIANCE TO
OVERHEAT. ENSURE ALL CLEARANCES (I.E. BACK, SIDE, TOP, VENT, MANTEL, FRONT, ETC.) ARE
WHEN USING PAINT OR LACQUER TO FINISH THE MANTEL, THE PAINT OR LACQUER MUST BE
We recommend all mantels made from non-combustible material. If using combustible materials, follow the
chart below.
NOTE: Mantel temperatures will rise above normal temperatures and may be hot to the touch.
17
16
15
14
13
12
0
4.4
NAILING TAB
To install the appliance face fl ush with the fi nished surface, position the
framework to accommodate the thickness of the fi nished surface. Bend out the
four nailing tabs, attached on either side of the appliance and secure to the 2x4
framing. The tabs will facilitate the installation of either a 3/4" or a 1" fi nished
surface thickness. The nailing tabs must not be removed.
CLEARLY MAINTAINED.
HEAT RESISTANT TO PREVENT DISCOLOURATION.
2
4
6
MANTEL DEPTH
WARNING
!
7" MANTEL
6" MANTEL
4" MANTEL
17"
2" MANTEL
16"
14"
12"
TOP OF UNIT
8
11
73.1
NAILING
NAILING
TAB
TAB
W415-0807 / C / 09.02.16