Removing The Card; Remove The Card - Canon EOS 5D MARK IV Instruction Manual

Removing the Card

Access lamp
CF card eject button
Caution
During Live View shooting or movie shooting, if the red E icon appears,
do not remove the card right away. The card may be hot due to the
camera's high internal temperature. Set the power switch to <2> and stop
shooting for a while. Then remove the card. If you take out the card while it is
still hot after shooting, you may drop the card and damage it. Be careful when
taking out the card.
Open the cover.
1
Set the power switch to <2>.
Check that the access lamp is off,
then open the cover.
If [Recording...] is displayed on the
LCD monitor, close the cover.

Remove the card.

2
To remove the CF card, push the
eject button.
To remove the SD card, push it in
gently and release it. Then pull it out.
Pull the card straight out, then close
the cover.
Installing and Removing the Card
47