Maximum Burst - Canon EOS 5D MARK IV Instruction Manual

3 Setting the Image-Recording Quality
One-touch Image Quality SettingN
With Custom Controls, you can assign the image-recording quality to
the <B> button or depth-of-field preview button so you can switch
to it momentarily. If you assign [One-touch image quality setting] or
[One-touch image quality (hold)] to the <B> button or depth-of-
field preview button, you can quickly switch to the desired image-
recording quality and shoot.
For details, see "Custom Controls" (p.495).
Under [51: Record func+card/folder sel.], if [Record func.] is set to [Rec.
separately], you cannot switch to the One-touch image quality setting.
Maximum Burst for Continuous Shooting
The maximum burst is displayed even when a card is not inserted in the
camera. Make sure that a card is inserted before taking a picture.
If the maximum burst is displayed as "99", it indicates that you can shoot 99
or more shots continuously. If the maximum burst decreases to 98 or lower
and the internal buffer memory becomes full, "buSY" will be displayed in the
viewfinder and on the LCD panel. Shooting will then be disabled temporarily.
If you stop continuous shooting, the maximum burst will increase. After all
the captured images are written to the card, you can resume continuous
shooting and shoot up to the maximum burst listed in the table on page 171.
174
The approximate maximum burst is
displayed in the viewfinder and on the
bottom right of the Quick Control screen
and Custom Quick Control screen.
If the maximum burst for continuous
shooting is 99 or higher, "99" will be
displayed.