Connecting To An Nfc-Enabled Smartphone - Canon EOS 5D MARK IV Instruction Manual

Connecting to an NFC-enabled Smartphone

NFC-enabled smartphones can be connected by touching them to the
camera.
The operation flow is as follows.
(1) Turn on the camera and smartphone.
(2) Enable the NFC function on the camera and smartphone.
(3) Touch the smartphone to the camera so that they come into
contact with each other.
For the camera's NFC setting, see page W-16.

For the smartphone's Wi-Fi setting, NFC setting, and NFC antenna

position, refer to the smartphone's instruction manual.
Enable the NFC function on the
1
camera and smartphone
Touch a smartphone to the
2
camera.
If the download site of Camera

Connect appears on the smartphone,
install Camera Connect (p.W-18).
If an image is being played back on

the camera, press the <3> button to
end the playback.
Touch the P mark on the

smartphone to that on the camera.
When a message indicating the

connection is being established is
displayed on the camera's LCD
monitor, move the smartphone away
from the camera.
 Camera Connect starts on the
smartphone and establishes a
connection.
.
(p.W-16)
W-21