User Interface; System Settings - Telstrom DF-IP-S-1B Installation Manual

User Interface

the IT administrator's requirement.

System Settings

www.telstrom.net
These are basic settings depending on your
setup.
The door phone Web GUI can be accessed
remotely by asking the IT administrator to
forward a TCP port to the static IP address
of the door phone. This port can be changed to
At the top of the screen displays the
current firmware and SIP firmware
versions, check
later versions.
To try and fault find problems you can
start enhanced logging and then place
the call and view the log file to diagnose
the problem. It is always good practice to
replicate the situation using a SIP soft
phone like x-lite before raising a support
ticket.
www.telstrom.net
hours.
If mode
is
(Busy)
then
call
192.168
.10.150
if
192.168
.10.16
is busy.
for
21