Sip Settings; Audio Codecs - Telstrom DF-IP-S-1B Installation Manual

SIP Settings

If DIP switch 2 (down)
If the registration failed check, the user credentials, IP address and
available audio codecs.

Audio Codecs

www.telstrom.net
If you have set DIP switch 2 (up)
then you will see limited settings as the
Door Phone will just be contacting via IP
addresses.
Change these settings to match your IP
PBX, ITSP.
SIP Proxy, you will see the following screen.
Ask your IP PBX or ITSP
administrator for the relevant codes to
be used. These should match the
device you are connecting to. To
change the microphone and speaker
gains as well as adjust the levels of the
echo canceller refer to
P2P Mode
Ask your IP PBX or ITSP
administrator for the
relevant settings. In most
cases the SIP Registration
Server Address / Port are
not required. After saving, a
prompt will show either
"Registration Successful" or
"Registration Failed".
Audio Volumes.
16