Network Settings; Basic Settings - Telstrom DF-IP-S-1B Installation Manual

Network Settings:

Basic Settings

5. The Door Phone can either switch profiles between Day and
Night profiles either a.)
6. If the optional keypad (IP Modular only) is attached, then
choose if you want a.) Direct dialing – e.g. calling extensions via the
keypad. Or b.) Dialing a
7. If the optional keypad (IP Modular only) is attached, what is
the installed position of it. i.e. What module number / position has the
keypad been installed.
www.telstrom.net
Ask your network administrator
for the relevant network settings to
configure the Door Phone. We
strongly suggest assigning a static
IP address and not "IP set via
DHCP"
Manually or b.) Automatically.
speed bin number 1-64.
To default the IP
address of the Door
Phone: DIP switch 4
(down). Default settings
DIP switch 3 (down).
After power up, push the
DIPs switches back up.
1. Change between Day
Night Mode and Busy Mode.
2. The tenant can enter
either a "*" or "#" to extend
the current call duration.
3. The tenant can enter
codes during a conversation
to terminate the current call.
4. The tenant can
manually change the profile
between Day or Night by
entering the code.
15