NETGEAR D6220 Manual page 10

3. On a Windows computer that is connected to the network, select
Start > Run, enter \\readyshare in the dialog box, and click the OK
button.
A window displays the files and folders on the device.
¾ To access the USB storage device from a Mac:
1. Connect your USB storage device to a USB port on the modem router.
2. If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage
device to the modem router.
When you connect the USB storage device to the modem router's USB
port, it might take up to two minutes before it is ready for sharing. By
default, the USB storage device is available to all computers on your
local area network (LAN).
3. On a Mac that is connected to the network, launch Finder and select
Go > Connect to Server.
The Connect to server window opens.
4. Enter the smb://readyshare in the Server Address field and click
the Connect button.
5. When prompted, select the Guest radio button.
6. If you set up access control on the modem router and you allowed
your Mac to access the network, select the Registered User
10