7.2.
Searching for OM-93 loggers
The OM-93 iPhone application requires that the Bluetooth
application is started and this is not the case then it will first ask to enable this. Once theOM-93
application is started then there is an option of scanning for all OM-93 loggers.
7.3.
Connecting to your logger
After searching the application will provide a list of all OM-93 devices that can be connected from your
mobile device. See figure 22. Select one of the devices within range.
The first time the iPhone application discovers a OM-93 logger, it will mark it as "-undiscovered-". Upon
connecting and thereafter it will use the logger name found when the application recovers it from the
logger.
Revision 1.0.3
Figure 21: OM‐93 iPhone App – Searching
®
is enabled for the mobile device. If the
Page 25