Planning A Route Using Coordinates - TomTom VIO User Manual

1. Open the contacts app on your phone.
2. Select the contact you want to plan a route to.
3. Select the contact's address.
The option screen opens.
4. Select the VIO button.
The VIO opens and the contact's address is shown on the map.
5. Select Ride.
A route is planned and then guidance to your destination begins on your VIO device.

Planning a route using coordinates

Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route using a pair of coordinates, do the following:
1. Tap Search at the top of the VIO app map.
2. Select the type of search button.
3. Select Latitude Longitude.
4. Type in your pair of coordinates. You can enter any of these coordinate types:
Decimal values, for example:

N 51.51000
51.51000 -0.13454
Tip: For decimal values you don't have to use a letter to indicate the latitude and longi-
tude. For locations west of the 0 meridian and locations south of the equator, use a minus
sign (-) before the coordinate.
Degrees, minutes and seconds, for example:

N 51°30'31"
N 51d30'31"
GPS standard coordinates, for example:

N 51 30.525
Note: The bar below the coordinates goes red if you enter coordinates that are not recognised
by your VIO.
5. As you type in the coordinates, suggestions are shown based on what you have entered. You can
continue typing or select a suggestion.
Tip: To see more results, hide the keyboard or scroll down the results list.
Tip: You can switch between seeing the results on the map or in a list by selecting the
list/map button:
6. Select a suggestion for your destination.
The location is shown on the map.
7. Select Ride.
A route is planned and then guidance to your destination begins on your VIO device.
Tip: You can add a stop to a route
W 0.13454
W 0°08'34" (Android)
W 0d08'34" (iPhone)
W 0 08.569
that you have already planned. (Android only.)
36