Table of Contents
Advertisement
4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER
4.2.2 AJ65MBTL1N-32T CC-Link embedded output adapter
Form
Specification
Number of output points
Isolation method
Rated load voltage
Operating load voltage
range
Max. load current
Max. inrush current
Leakage current at OFF
Max. voltage drop at ON
Output method
Protection functions
Response
OFF
ON
time
ON
OFF
External
Voltage
Power supply
Current
for output
Surge suppression
Wiring method for common
CC-Link station type
Number of occupied
stations
I/O adapter
Voltage
power supply
Current
Noise durability
DC type noise voltage 500Vp-p, noise width 1μs, noise carrier
frequency 25 to 60Hz (noise simulator condition)
Dielectric withstand voltage 500V AC for 1 minute between all DC external terminals and
ground
Insulation resistance
10MΩ or higher, measured with a 500V DC insulation resistance
tester
Weight
External wiring system
4 - 7
AJ65MBTL1N-32T
32 points
Photocoupler
12/24V DC
10.2 to 26.4V DC (ripple ratio: within 5%)
0.1A/point, 3.2A/1 common
0.7A 10ms or lower
0.1mA or lower
0.1V or lower (TYP) 0.1A
0.2V or lower (MAX) 0.1A
Sink type
Overload, over-voltage and overheat protection
1ms or lower
1ms or lower (rated load, resistive load)
10.2 to 26.4V DC (ripple ratio: within 5%)
15mA or lower (When all points are ON at 24V DC)
Not including external load current
Zener diode
32 points/1 common
Remote I/O station
1 station 32 points assignment
(use 32 points)
20.4 to 26.4V DC (ripple ratio: within 5%)
60mA or lower (When all points are ON at 24V DC)
0.04kg
62-pin, 2-row, 2mm-pitch pin header
Transistor output adapter
MELSEC-A
Surface shape
4 - 7
Advertisement
Table of Contents
