Table of Contents
Advertisement
4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER
4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER
4.1 Specifications for Input Adapters
4.1.1 AJ65MBTL1N-16D CC-Link embedded input adapter
Form
Specification
Number of input points
Isolation method
Rated input voltage
Rated input current
Operating voltage range
Max. simultaneous ON
input points
ON voltage/ON current
4
OFF voltage/OFF current
Input resistance
Response
OFF
ON
time
ON
OFF
Input type
Wiring method for common
CC-Link station type
Number of occupied stations
I/O adapter
Voltage
power supply
Current
Noise durability
DC type noise voltage 500Vp-p, noise width 1μs, noise carrier
frequency 25 to 60Hz (noise simulator condition)
Dielectric withstand voltage 500V AC for 1 minute between all DC external terminals and
ground
Insulation resistance
10MΩ or higher, measured with a 500V DC insulation resistance
tester
Weight
External wiring system
4 - 1
AJ65MBTL1N-16D
16 points
Photocoupler
24V DC
Approx. 4mA
19.2 to 26.4V DC
(ripple ratio: within 5%)
50% (See section 1.3)
18V or higher/3.5mA or higher
6V or lower/1.7mA or lower
Approx. 5.1kΩ
1.5ms or lower (at 24V DC)
1.5ms or lower (at 24V DC)
Positive common (sink)
16 points/1 common
Remote I/O station
1 station 32 points assignment (use 16 points)
20.4 to 26.4V DC (ripple rate: within 5%)
35mA or lower (at 24V DC)
0.03kg
44-pin, 2-row, 2mm-pitch pin header
DC input adapter
Surface shape
MELSEC-A
4 - 1
Advertisement
Table of Contents
