Overview; Features - Mitsubishi Electric CC-Link User Manual

1 OVERVIEW

1 OVERVIEW
This manual describes the specifications of the CC-Link embedded I/O adapter used
as the remote I/O station of a Control & Communication Link (hereafter abbreviated to
CC-Link) system.

1.1 Features

The following are the features of the CC-Link embedded I/O adapter.
(1) Device-embedded CC-Link remote I/O
(2) Direct installation to user board
(3) Flexible noise reduction measures
(4) Insulation method
(5) Overload protection function, overvoltage protection function and
(6) Cascade connection
(7) CC-Link Ver. 1.10 compatibility
1 - 1
This adapter is a modular remote I/O used as a device-embedded adapter.
Using a pin header as the external interface for adapter power supply,
transmission, I/O signals and others, the adapter can be installed directly to a
user board.
Depending on external noise environment, the user board can be equipped with
a noise filter to enhance noise resistance as necessary.
The adapter power supply uses a transformer insulation method and the external
I/O uses a photocoupler insulation method.
overheat protection function
The transistor output section has the overload, overvoltage and overheat
protection functions.
The CC-Link embedded I/O adapters can be cascaded. Two CC-Link embedded
I/O adapters can be installed side by side within the same board.
User board
The CC-Link embedded I/O adapter is compatible with CC-Link Ver. 1.10.
MELSEC-A
1
DA
DB
DG
SLD
1 - 1