Audiovox APS 95 BT3S Programming Manual

The transmitters included with the security system have been pre - programmed
at the factory, with each button pre - assigned to control a specific function of
the security system. Although the security system in the vehicle has either 3
or 4 channels ( RECEIVER ) depending on the model, the transmitters included
with the system are 7 channel transmitters. This allows you to program each
transmitter to more than one vehicle in two car families, and also allows you to
change which button ( s ) control certain functions of the system. ( Example:
Transmitter channel 5 can be programmed to activate Receiver channel 2. )
Refer to the chart below for access to each of the transmitter channels, and
for the standard factory button assignments.
TRANSMITTER
CHANNEL BUTTONS CHANNEL
1 1 1
2 2 2
3 3 3
4 2 & 3 4
5 1 & 2 -
6 1 & 3 -
7 1, 2, 3 -
* Some of the more common accessories for these additional channels are;
AS 9151N Remote car starter
AS 9153 Remote window roll up
AS 9256 Remote trunk release relay
TRANSMITTER PROGRAMMING GUIDE
Model : APS 95 BT3S
SYSTEM RECEIVER
FUNCTION
Remote Arm & Disarm
Remote Emergency Panic
Remote Door Lock & Unlock
* Pulsed Output for Accessories
* Switched Output for Accessories
* Switched Output for Accessories
-
-
-