Appendix B - Setting Up A Pin Id And Print Control; Introduction; Connection Arrangement - Oki S900 Engineer's Installation Manual

APPENDIX B – SETTING UP A PIN ID AND
PRINT CONTROL

INTRODUCTION

A printing limitation can be applied to every user via the PIN ID and the
Print Control Utility (option) of the printer, and information about
printing jobs e.g. total print count can be acquired as log data.
The following conditions can be set:
Printing limitation can be applied to certain users.
l
Color printing limitation can be applied to certain users.
l
Printing limitation can be applied to every user.
l
Printing limitation can be applied to every section/department
l
Print logs can be acquired.
l

CONNECTION ARRANGEMENT

The S900 Scancopier is connected via an IEEE1394 cable (1) to the
printer, which is connected via the network hub (2) to the PC.
APPENDIX B – SETTING UP A PIN ID AND PRINT CONTROL > 43
2
1
English