Invacare ORBIT Service Manual page 20

PROCEDURE 5
STEP 3: Determine the statement that corresponds with your desired change. Then, within that
section, determine if a change in the base frame width is desired. Continue to follow
C
that row all the way over to the right column. This will tell you which sections in this
H
procedure need to be followed to complete your width change.
A
N
I Changing the seat frame width remaining within the limitations of the small seat frame range
G
(10-13-inches).
I
N
G
T
H
E
W
I
D
T
H
II Changing the seat frame width from small seat frame (10-13-inches) to large seat frame (14-16-
inches) or vice versa.
III Changing the seat frame width remaining within the limitations of the large seat frame range
(14-16-inches).
IV Only changing the base frame width and not changing the seat frame width.
Refer to SECTIONS D and F - Small Seat Frame (Single tilt mechanism)
Refer to SECTIONS E and F - Large Seat Frame (Dual tilt mechanisms)
Changing the width
of the base frame?
YES NO
Changing the width
of the base frame?
YES NO
Changing the width
of the base frame?
YES NO
Perform the following
Section(s)
Perform the following
Section(s)
Perform the following
Section(s)
20
CHANGING THE WIDTH
A
A, D, F
B
C, F
A
A, E, F