Network Connections - D-Link DFE-530TX+ Quick Install Manual

Configure your Adapter
If you are not using a DHCP capable gateway/router, or you need to
assign a static IP address, please follow the steps below.
Step 1:
Windows 2000: Click on Start > Settings > Control Panel >
®

Network Connections

Windows XP: Click on Start > Control Panel > Network Connections
Windows Vista : Click on Start > Control Panel > Network and
®
Internet > Network and Sharing Center > Manage network
connections
Windows 7 : Click on Start > Control Panel > Network and Internet
®
> Network and Sharing Center > Change Adapter Settings
Step 2:
Right-click on the Local Area Connection, which represents your
D-Link network adapter, and select Properties.
Step 3:
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4:
Click Use the following IP address and enter an IP address that
is on the same subnet as your network or the LAN IP address on
your router.
Example: If the router's LAN IP address is 192.168.0.1, make your
IP address 192.168.0.X where X is a number between 2 and 99.
Make sure that the number you choose is not in use on the network.
Set Default Gateway the same as the LAN IP address of your router
(192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router
(192.168.0.1). The Secondary DNS is not needed or you may enter
a DNS server from your ISP.
9 D-Link DFE-530TX+ Quick Install Guide