D-Link DFE-530TX+ Quick Install Manual
Hide thumbs
Also See for DFE-530TX+:
- User manual (30 pages) ,
- Quick installation manual (15 pages) ,
- Quick install manual (6 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for D-Link DFE-530TX+
Summary of Contents for D-Link DFE-530TX+
-
Page 2: System Requirements
System Requirements • A computer with an available PCI slot • Windows 7, Vista , XP or 2000, Linux 2.2.x and above, ® ® Netware 5.x/6.x, or Mac OS 10.2.x • 300MHz processor and at least 64MB of RAM • 32MB free hard drive space • CD-ROM Drive Package Contents • D-Link DFE-530TX+ Ethernet Desktop Adapter • Manual and Software on CD • WOL Cable • Standard and Low Profile Brackets • Quick Install Guide If any of the above items are missing, please contact your reseller. D-Link DFE-530TX+ Quick Install Guide... -
Page 3: Hardware Overview
Hardware Overview Hardware Overview Link/Activity A steady green light indicates a good connection to your ethernet device. A blinking light indicates data is being transmitted (sending or receiving). Speed When lit, the device speed is 100Mbps. If the light is not lit, the device speed is 10Mbps. D-Link DFE-530TX+ Quick Install Guide... -
Page 4: Software Installation
Adapter into your computer before installing the driver software from the D-Link CD. Turn on your computer and Insert the D-Link DFE-530TX+ Driver CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows XP. The steps and screens are similar for the ® other Windows operating systems. If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the Run command box type “D:\DFE530TX+. exe” (where D: represents the drive letter of your CD-ROM drive). Drivers for non-Windows operating systems are located on the ® D-Link CD. Software Installation When the autorun screen appears, click Install Drivers. D-Link DFE-530TX+ Quick Install Guide... - Page 5 Note: Write down the serial number and hardware revision (e.g. A1) before installing the adapter. If you contact technical support, you will need this information. Replace the case, plug in the power cable, and power on your computer. D-Link DFE-530TX+ Quick Install Guide...
- Page 6 Windows 2000 users: If you receive the Found New Hardware Wizard, please refer to page 10 of the manual to finish your installation. Windows XP users: You will receive a bubble stating that Windows found the DFE-530TX+ adapter. Windows Vista and Windows 7 users: You will receive a bubble ® ® stating that Windows has installed the device driver. You may now verify your installation. D-Link DFE-530TX+ Quick Install Guide...
-
Page 7: Verify Installation
Step 2: Windows 2000/XP: Click on the System icon. Click the Hardware tab and then click Device Manager. Windows Vista: Click on the System and Maintenance icon and then click on Device Manager. Windows 7: Click on the System and Security icon and then click ® on Device Manager under System. Step 3: Scroll down and click the plus (+) sign next to Network Adapters. The D-Link DFE-530TX+ PCI Fast Ethernet Adapter (rev.F) will be listed. D-Link DFE-530TX+ Quick Install Guide... -
Page 8: Configure Your Adapter
Configure your Adapter Configure your Adapter After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. router) automatically. To verify your IP address, please follow the steps below. 2000/XP: Click on Start > Run. In the run box type cmd Windows ® and click OK. Windows Vista / Windows 7: Click on Start > All Programs >... -
Page 9: Network Connections
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. D-Link DFE-530TX+ Quick Install Guide... - Page 10 Configure your Adapter Step 5: Click OK twice to save your settings. D-Link DFE-530TX+ Quick Install Guide...
- Page 11 Notes Notes D-Link DFE-530TX+ Quick Install Guide...
-
Page 12: Technical Support
6FE530TXQB02G Copyright ©2010 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners.