Adapter" read the explanation of the problem. This information will be helpful if you
require technical support from D-Link.
Verify Cable Connections
Check to see that the computer(s) you are troubleshooting are properly connected. Each
computer must be connected from its DFE -680TXD with a Category 5 cables. Examine
the network cables and ensure that they have not been damaged by walking-on, rolling
over chairs, or closed in doors. Additionally, make note of and alleviate any possible
electromagnetic interference that may be effecting your network.
Your network cables can be plugged into any port on your hub except the "Uplink" port.
The "Uplink" port is only used when connecting your hub to another hub or switch.
32