1060 Fan Assembly And Heat Sink Assembly - Lenovo Edge 2 15 Hardware Maintenance Manual

1060 Fan assembly and heat sink assembly

For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 35
Figure 6. Removal steps of fan assembly and heat sink assembly
Unplug the fan connector in the direction shown by arrow
and loosen the screws
2
the direction shown by arrow
Step Screw (quantity)
M2 × 4 mm, flat-head, nylok-coated
2
(1) Thermal module to FAN
When installing: Make sure that the connectors are attached firmly.
. Lift the fan assembly and heat sink assembly in
3
. Be careful not to damage the connector.
4
c c
c c
c
a
Color
Silver
Lenovo Edge 2 15
. Remove the screw
1
d b
Torque
1.85+/-0.15 kgf.cm
41