1050 Dimm - Lenovo Edge 2 15 Hardware Maintenance Manual

Lenovo Edge 2 15 Hardware Maintenance Manual

1050 DIMM

For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 35
Figure 5. Removal steps of DIMM
Remove the DIMM cover with fingers as shown.
Release the two latches on both edges of the socket at the same time in
thedirection shown by arrows , and then unplug the DIMM in the direction
1
shown by arrow .
2
a a
b
When installing: Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly
fixed in the slot and difficult to be moved.
40