1120 Mic Board, Lcd Cover, And Hinges - Lenovo Edge 2 15 Hardware Maintenance Manual

1120 Mic board, LCD cover, and hinges

For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 35
• "1030 Hard disk drive" on page 36
• "1040 PCI Express Mini Card for wireless LAN" on page 38
• "1050 DIMM" on page 40
• "1060 Fan assembly and heat sink assembly" on page 41
• "1070 LCD unit" on page 42
• "1080 System board" on page 44
• "1090 Speakers" on page 46
• "1100 Power assembly, touch pad module and IO board" on page 47
• "1110 LCD front cover" on page 49
Figure 12. Removal steps of Mic board, LCD cover, and hinges
Adjust the hinges in the direction shown by arrows
rubbers and pull out the cables.
2
Remove screw
Step Screw (quantity)
M2 × 4 mm, flat-head,
1
nylok-coated (1) LCD bezel to
LCD cover
a
b
. Remove the LCD module in the direction shown by arrow
3
c
Lenovo Edge 2 15
. Then remove the hinge
1
a
d
Color Torque
Silver 1.85+/-0.15 kgf.cm
.
4
51