1060 Fan Assembly And Heat Sink Assembly - Lenovo IdeaPad U300e Hardware Maintenance Manual

Lenovo IdeaPad U300e Hardware Maintenance Manual

1060 Fan assembly and Heat Sink assembly

For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 35
• "1030 Hard disk drive" on page 36
• "1050 PCI Express Mini Card for wireless LAN" on page 38
Figure 6. Removal steps of fan assembly and heat sink assembly
Detach two fan connectors in the direction shown by arrows
screws
When installing: Make sure that the fan connector is attached firmly to the
system board.
40
and four screws
2
Step Screw (quantity)
M2 × 3 mm, flat-head, nylok-coated (4)
2
M2 × 4 mm, flat-head, nylok-coated (4)
3
.
3
2
3
1
, remove four
1
2
3
3
1
Color Torque
White 1.5 ± 0.2 kgfcm
Black 1.5 ± 0.2 kgfcm