Important Error Messages; Security Codes - Panasonic EB-GD55 Service Manual

3.10. Important Error Messages

The following table is a list of error messages that may occur during use of the telephone, with a description and suggested
course of action.
Error Message
Area not Allowed
Network not Allowed
Security Failure
SIM Blocked
SIM Error
Message Rejected Store
Full
PIN2 Invalidated
Warning Store Full
Continue?
Auto Redial List Full

3.11. Security Codes

Code Type
Personal Identification
Number (PIN)
PIN 2
PIN/PIN 2 Unblocking
Key
(PUK/PUK 2)
Password
Lock Code
Roaming in the selected area is not allowed.
Roaming with the selected network is not allowed.
The network has detected authentication failure because the SIM is not registered
with that network. Contact to Service Provider.
The SIM is blocked because the wrong PUK has been entered ten times. Contact
to Service Provider.
The telephone has detected a problem with SIM. Switch the telephone off and then
back on. If the message does not disappear, contact to Service Provider.
A message has been received but the message store is full. To receive messages,
delete some of the currently stored messages or set messages to automatically
clear (Menu:Message:Parameters:Auto Delete).
The PIN2 is blocked permanently because the wrong PUK2 has been entered 10
times. Services controlled by PIN2 cannot be used. Contact to Service Provider.
The message is full. Now messages cannot be stored until some of the currently
stored messages are deleted.
Redial list of unsuccessfully dialed numbers is full. Switch the telephone off and
then on again.
Number of Digits
4 to 8
4 to 8
8
4
4 to 8
Explanation / Remedy
Controls SIM security. Supplied by the service
provider.
Controls memory security. Supplied by the
service provider.
Used to unblock PIN and PIN 2. A PIN or PIN 2
will become blocked if the wrong PIN or PIN 2 is
entered three times. When the blocked PIN or
PIN 2 is unblocked, a new PIN or PIN 2 must be
entered. If the wrong PUK or PUK 2 is entered
10 times, the cursor SIM will be unusable.
Supplied by the service provider.
Controls the call bar function. If the wrong
password is entered three times, this service will
be revoked. Supplied by the service provider.
Controls telephone security.
Factory set to "0000"
– 3–14 –
Description