Table of Contents
Advertisement
Proxy port number
1
Use callback*
1
Callback type*
Callback number*
Use PPP
1
compression*
Use login script*
1
Login script*
Modem
1
initialisation*
1
*
Available only for Data call.
Note: If your service provider has protected some of your settings, you may
not be able to modify them.
GPRS settings
z Main menu > Settings > Settings > Connection > GPRS
1. [192] to scroll to GPRS connection or Access point 7 [0]
GPRS
connection
Access point
Enter the proxy port number for access point.
Select Yes to use dial back servers.
Select Use server no. for callback, or Use other
no.
Enter the phone number the callback server
1
should use.
Select Yes to use PPP (Point-to-Point Protocol)
compression.
Select Yes to use login script defined in Login
1
script field.
Enter the login script to be used.
If desired, enter a modem initialisation string (AT
command string).
Choose When needed to connect to GPRS service only
when you open an application that uses GPRS. After you
close the application, GPRS service will disconnect.
Choose When available to stay continuously connected
when you are in a GPRS service area, in which the
GPRS icon
replaces the signal strength icon p.
Choose an access point supplied by your service
provider to use the phone as a modem to enable GPRS
connection from a computer.
Settings
49
Advertisement
Table of Contents
